Spine导出json文件 我没有设定皮肤
"name": "default",前面会加了一个“name” 我看别人的导出文件都没有“name”
以至于程序那边导入带“name”的json文件会有报错
这是为什么
之后我试了别人做的spine文件 导出还是有“name” 别人导出就没有
帮忙解答 谢谢
下面是源码 第二行的“name”导出一直在
"skins": [{
"name": "default",
"attachments": {
"armAD": {
"armAD": {
"type": "mesh",
"uvs": [0.89202, 0.15353, 0.94549, 0.41304, 0.9247, 0.65151, 0.79993, 0.90401, 0.60387, 1, 0.25037, 0.9475, 0.31276, 0.65291, 0, 0.40041, 0.06323, 0.1928, 0.27414, 0.07778, 0.60684, 0, 0.42267, 0.84089, 0.64843, 0.82966, 0.70487, 0.62486, 0.67517, 0.2391, 0.49396, 0.62486, 0.40187, 0.43969],
"triangles": [14, 10, 0, 14, 0, 1, 14, 16, 9, 14, 9, 10, 8, 9, 16, 7, 8, 16, 13, 14, 1, 16, 14, 13, 15, 16, 13, 2, 13, 1, 6, 7, 16, 6, 16, 15, 12, 15, 13, 11, 6, 15, 11, 15, 12, 3, 13, 2, 12, 13, 3, 5, 6, 11, 4, 11, 12, 4, 12, 3, 5, 11, 4],
"vertices": [-2.78, 11.54, 15.95, 12.91, 33.09, 11.79, 51.17, 7.12, 57.92, 0.29, 53.85, -11.64, 32.7, -9.01, 14.27, -19.21, -0.62, -16.7, -8.73, -9.33, -14.06, 2.11, 46.32, -5.6, 45.69, 2.1, 31, 4.37, 3.21, 4.02, 30.82, -2.8, 17.42, -5.61],
"hull": 11,
"edges": [0, 20, 0, 2, 2, 4, 4, 6, 6, 8, 8, 10, 10, 12, 12, 14, 14, 16, 16, 18, 18, 20],
"width": 31,
"height": 65
求助啊
